System information and console port speed, 3 system information and console port speed – ZyXEL Communications ZyXEL ZyWALL 2WE User Manual
Page 235

ZyWALL 2 and ZyWALL 2WE
System Information and Diagnosis
21-3
Table 21-1 System Maintenance: Status Menu Fields
FIELD DESCRIPTION
TxPkts
The number of transmitted packets on this port.
RxPkts
The number of received packets on this port.
Cols
The number of collisions on this port.
Tx B/s
Shows the transmission speed in Bytes per second on this port.
Rx B/s
Shows the reception speed in Bytes per second on this port.
Up Time
Total amount of time the line has been up.
Ethernet Address
The Ethernet address of the port listed on the left.
IP Address
The IP address of the port listed on the left.
IP Mask
The IP mask of the port listed on the left.
DHCP
The DHCP setting of the port listed on the left.
System up Time
The total time the ZyWALL has been on.
ZyNOS F/W
Version
The ZyNOS Firmware version and the date created.
You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.
21.3 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the
System Information and Console Port Speed:
Step 1.
Enter 24 to go to Menu 24 – System Maintenance.
Step 2.
Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
Step 3.
From this menu you have two choices as shown in the next figure: