ZyXEL Communications ZyXEL ZyWALL 2WE - Manual (Page 244)

ZyWALL 2 and ZyWALL 2WE
21-12 System Information and Diagnosis
Step 2. From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.
Figure 21-10 Menu 24.4: System Maintenance: Diagnostic
21.5.1 WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in Figure 21-11. LAN DHCP has
already been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address Assignment
field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet)
or None, (when you have a static IP). The WAN Release and Renewal fields in menu 24.4 conveniently
allow you to release and/or renew the assigned WAN IP address, subnet mask and default gateway.
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A