beautypg.com

Preface, Read this first – Texas Instruments TMS320DM357 User Manual

Page 11

background image

Preface

SPRUGH3 – November 2008

Read This First

About This Manual

This document describes the universal serial bus (USB) controller in the TMS320DM357 Digital Media
System-on-Chip (DMSoC).

Notational Conventions

This document uses the following conventions.

Hexadecimal numbers are shown with the suffix h. For example, the following number is 40
hexadecimal (decimal 64): 40h.

Registers in this document are shown in figures and described in tables.

Each register figure shows a rectangle divided into fields that represent the fields of the register.
Each field is labeled with its bit name, its beginning and ending bit numbers above, and its
read/write properties below. A legend explains the notation used for the properties.

Reserved bits in a register figure designate a bit that is used for future device expansion.

Related Documentation From Texas Instruments

The following documents describe the TMS320DM357 Digital Media System-on-Chip (DMSoC). Copies of
these documents are available on the Internet at

www.ti.com

. Tip: Enter the literature number in the

search box provided at www.ti.com.

SPRUG06

TMS320DM357 DMSoC Video Processing Back End (VPBE) User's Guide. Describes

the video processing back end (VPBE) in the TMS320DM357 Digital Media System-on-Chip
(DMSoC) video processing subsystem. Included in the VPBE is the video encoder, on-screen
display, and digital LCD controller.

SPRUG25

TMS320DM357 DMSoC ARM Subsystem Reference Guide. Describes the ARM

subsystem in the TMS320DM357 Digital Media System-on-Chip (DMSoC). The ARM subsystem is
designed to give the ARM926EJ-S (ARM9) master control of the device. In general, the ARM is
responsible for configuration and control of the device; including the video processing subsystem,
and a majority of the peripherals and external memories.

SPRUG26

TMS320DM357 DMSoC Universal Asynchronous Receiver/Transmitter (UART) User's

Guide. This document describes the universal asynchronous receiver/transmitter (UART) peripheral
in the TMS320DM357 Digital Media System-on-Chip (DMSoC). The UART peripheral performs
serial-to-parallel conversion on data received from a peripheral device, and parallel-to-serial
conversion on data received from the CPU.

SPRUG27

TMS320DM357 DMSoC Inter-Integrated Circuit (I2C) Peripheral User's Guide.

Describes the inter-integrated circuit (I2C) peripheral in the TMS320DM357 Digital Media
System-on-Chip (DMSoC). The I2C peripheral provides an interface between the DMSoC and other
devices compliant with the I2C-bus specification and connected by way of an I2C-bus. External
components attached to this 2-wire serial bus can transmit and receive up to 8-bit wide data to and
from the DMSoC through the I2C peripheral. This document assumes the reader is familiar with the
I2C-bus specification.

SPRUGH3 – November 2008

Preface

11

Submit Documentation Feedback