beautypg.com

Cleaning the fuser rollers, Quick steps, Cleaning the fuser rollers 4-22 – Tektronix Phaser 300X User Manual

Page 98: Quick steps 4-22

background image

4

Caring for Your Printer

4-22

Phaser 300X Color Printer

Cleaning the fuser rollers

If you are using shiny or smooth paper, you may occasionally see spots of
ink in the white portion of the printed image, or you may notice that areas of
the image are missing. These print defects can indicate that ink is being
transferred from the printed paper to the fuser roller.

To correct the problem, first try these quick steps:

Quick Steps

1.

Use a less shiny type of paper.

2.

Make several test prints on standard office Bond paper (laser
printer or photocopy paper). To do this, press the

TEST PRINT

button on the front panel. Be sure to load the paper so that the
long side of the paper enters the printer first, as shown.

You should see a repeating pattern of ink spots on the blank part
of the paper, indicating that the ink has transferred from the fuser
onto the paper.

30849-29