Tektronix Phaser 300X - Manual (Page 14)

1 Introduction
1-4 Phaser 300X Color Printer
Print quality and speed. The Phaser 300X has 300 dots-per-inch resolution
and a print speed of 1 to 4 minutes per Letter-sized page, depending on the
print quality mode. Print quality modes include Standard, Enhanced, and
Premium.
Media support. The printer produces laser-quality prints on paper ranging
from 100 x 150 mm (4 x 6 in.) to 305 x 457 mm (12 x 18 in.). The printer has
10 Mbytes of standard memory, expandable in 4-Mbyte increments to
22 Mbytes. With the standard memory configuration, the maximum
printable area is 287 x 408 mm for A3-size media and 10.5 x 16.5 in. for B-size
media. When you expand memory to 14 Mbytes, you can print Tabloid-size
bleed images (297 x 445 mm, 11.7 x 17.5 in.) on Tabloid Extra paper
(305 x 457-mm, 12 x 18 in.).
Easy to use and maintain. When the printer needs ink, you just drop in solid
ColorStix ink. Each ColorStix ink stick is a unique shape so that you always
load the correct color into the correct ink bin.
To order supplies such as paper or ColorStix ink, refer to the supplies
information sheet that is shipped with the printer and contact your local
dealer or, in the United States, call Tektronix at
1-800-835-6100 . You can also
retrieve this information from Tektronix’ World Wide Web server at
www.tek.com .