Tektronix Phaser 300X - Manual (Page 29)

Getting Set Up 2
User Manual 2-15
Selecting a language for the front panel
Messages that appear in the front panel window are in English. You can leave the front panel set to
English or change the language to French, German, Spanish, Italian, or Japanese.
1. When the printer is on and the Ready
message appears, press the UTILITIES
button. You see this message (Vx.xx is the
firmware version number):
Utilities Vx.xx
Exit Next
In the Utilities mode, you can scroll
through the menu selections using
the
TEST PRINT button. The CLEAN
PRINT HEAD button allows you to
execute a function or change a
setting.
2. Press the TEST PRINT button ( Next ) twice to scroll to the language selection mode. You see
this message:
Language: English
Change Next
3. Press the CLEAN PRINT HEAD button ( Change ) to change the language selection:
■ Press one time = German
■ Press two times = French
■ Press three times = Italian
■ Press four times = Spanish
■ Press five times = Japanese
4. Press the TEST PRINT button 5 times to return to the Utilities mode. The message appears in
whichever language you selected:
Utilities Vx.xx
Exit Next
5. Press the CLEAN PRINT HEAD button ( Exit ) to exit the Utilities mode. The front panel
displays the Ready message.
UTILITIES
CLEAN
PRINTHEAD
TEST
PRINT
Utilities Vx.xx
Exit Next
8873-09