Tektronix Phaser 300X - Manual (Page 125)

6 Troubleshooting
6-16 Phaser 300X Color Printer
Large spots or blobs of ink appear on the print. Spots that appear only on the
back of the paper indicate a dirty drum. Spots on the image side or front of
the paper indicate that the fuser wiper needs to be replaced. Refer to
“Changing the fuser wiper” on page 4-4 for details on replacing the fuser
wiper.
Small spots of ink are randomly scattered across the page. Make a test print. If
the spots are still present, change the fuser wiper (refer to “Changing the
fuser wiper” on page 4-4 for details).
Small or light ink specks appear anywhere on the edge. Clean the paper clamp.
Refer to “Cleaning the paper tension blade, paper clamp, and drum” on
page 4-13 for details.
8344-37
Letterhead