beautypg.com

Tektronix Phaser 300X User Manual

Page 105

background image

Caring for Your Printer

4

User Manual

4-29

8.

Install the paper tray.

9.

Press the

CLEAN PRINT HEAD

button.

After you press the button, the printer feeds the 10 sheets of paper
through the printer so that the fuser cleaning pad cleans the fuser
roller.

10.

Remove the paper tray.

11.

Remove the fuser cleaning pad.

12.

Install a new fuser wiper.

13.

Load another 10 sheets of standard office Bond paper (laser printer
or photocopy paper) into the paper tray. Be sure to load the paper
so that the long side of the paper enters the printer first, as shown
on page 4-22.

14.

Install the paper tray.

15.

Press the

CLEAN PRINT HEAD

button.

After you press the button, the printer feeds the 10 sheets of paper
through the printer.

If any ink is visible on the paper, repeat Steps 13, 14, and 15.

16.

Return to normal operation by pressing the

TEST PRINT

button to

reach this display:

Utilities Vx.xx

Exit Next

17.

Press the

CLEAN PRINT HEAD

button to exit Utilities mode.