Tektronix Phaser 300X - Manual (Page 67)

3 Printing
3-34 Phaser 300X Color Printer
Using manual feed
Use manual feed for thick paper such as Cover, envelopes, and paper sizes
that range from 100 x 150 mm (4 x 6 in.) to 305 x 457 mm (12 x 18 in.).
Note All page sizes except A-size (8.5 x 11 in.) and A4-size (210 x 297 mm)
must be fed into the printer so that the short side of the paper enters the
printer first. If you have not selected manual feed in the driver window,
manual-fed A- and A4-size paper must be fed into the printer in the same
orientation as the current media that is loaded in the paper tray.
Inserting the paper
1. Adjust the guides to the width of the paper, depending on the
desired orientation.
A-size (8.5 x 11 in.) or A4-size (210 x 297 mm) paper must be fed
into the printer so that its orientation matches the orientation of
the current media loaded in the paper tray.
2. Insert the paper until it stops.
3. Wait 5 seconds after the first sheet enters the printer before
inserting a second sheet.
8873-11
=
5 Sec.
1 2