Tektronix Phaser 300X - Manual (Page 75)

3 Printing
3-42 Phaser 300X Color Printer
Printing with PCL5
In PCL5 mode (HP LaserJet III emulation), the printer supports Courier,
Times, and Universe typefaces in the following styles and stroke weights:
bold medium, italic medium, and bold italic.
To use a PCL5 application, you must customize PCL5 and set up a printer
port with the appropriate automatic language selection utility file (refer to
the Phaser 300X Drivers and Utilities Printing Reference for information about
utility files).
Printing with HP-GL
1. Change the printer’s language from PostScript to HP-GL. (Refer
to the Phaser 300X Drivers and Utilities Printing Reference for details
on how to change the language.)
2. Set up the printing options in your HP-GL application by selecting
a printer driver that supports the HP 7475A plotter.
3. Print from your HP-GL application as usual.
Printing PostScript
Change the printer’s language from HP-GL to PostScript. (Refer to the
Phaser 300X Drivers and Utilities Printing Reference for details on how to
change the language.)