Tektronix Phaser 300X - Manual (Page 80)

4 Caring for Your Printer
4-4 Phaser 300X Color Printer
Changing the fuser wiper
Replace the fuser wiper ( A ) when you open a new box of black ColorStix ink sticks or after 2,000
prints, whichever comes first. Each box of black ink sticks contains a new fuser wiper.
1. Remove the paper tray.
2. Open the printer’s top cover.
3. Lift the fuser wiper cover.
4. Pull out the old fuser wiper and
insert the new one. As you insert it,
line up the notches on the fuser
wiper with the notches in the
printer.
Note To prevent paper-pick problems, clean the paper-pick and feed rollers when you change the fuser
wiper. Refer to “Cleaning the paper-pick rollers” on page 4-11 and “Cleaning the feed rollers” on
page 4-12.
2
1
8873-13
A
3 4 3