TRENDnet TDM-E400 - Manual (Page 47)

Chapter 3. Getting Started with Web Configuration
47
Rebooting the device using Web Configuration
To reboot the device, display the Commit & Reboot page, select the
appropriate reboot mode from the drop-down menu, and then click
.
You can select from the following reboot options:
Option Description
Reboot Reboots using the settings currently in memory,
including any changes you made and committed
during the current session.
Reboot from Default
Configuration Reboots the device to default settings provided by
your ISP or the manufacturer. Choosing this
option erases any custom settings.
Reboot from Backup
Configuration Reboots the device using the settings that were in
effect prior to the most recently committed
settings.
Reboot from Last
Configuration Same as Reboot.
Reboot from Clean
Configuration Reboots the device with no configuration. This
option will disable access to the Web
Configuration, as no LAN interface will be defined.
This option is intended only for technicians who
have a serial port connection to the device and
knowledge of its command line interface.
Reboot from
Minimum
Configuration Reboots the device with only these settings:
o An Ethernet interface is configured with IP
address 192.168.1.254 (mask 255.255.255.0).
o The user login is set to the following:
User Name: admin
Password: admin
Rebooting may take 20-30 seconds. If your browser appears to be
waiting to reconnect, press on your keyboard to refresh the
connection. Or, retype the URL (192.168.1.254 by default) in your
browser’s address box and press . The page should
redisplay.
If you have difficulty in reconnecting to Web Configuration after
rebooting, or if the device is not providing Internet connectivity as
before, reboot using the Reboot from Backup Configuration setting
to return to the previous settings.
WARNING
If the Ethernet Modem Router provides a Reconfigure button on
the back panel (in addition to the power on/off button), do not use it
to activate new changes. This button resets the device settings to
the manufacturer’s default values. Any custom settings will be lost.