TRENDnet 54Mbps 802.11g Wireless Access Point TEW-430APB (c1) - Manual

TEW-430APB Wireless Access Point is today's link to Wireless Technology.
Compliant with the IEEE Wireless Networking Standard 802.11g, it provides
Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging
and roaming capabilities for wireless nodes. The TEW-430APB also provides
WDS bridging functions, allowing users to connect two or more Access Points
together, wirelessly. With this Wireless Access Point and Wireless Network
Adapters, users can connect to Ethernet/Fast Ethernet LAN at home or office to
access network resources with coverage up to 300 meters.
TEW-430APB (c1)
54Mbps 802.11g Wireless Access Point
TEW-503PI (07-28-2005)
TEW-430APB
rev:07.07.2006
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Operates as Access Point, AP Client or WDS Wireless Bridging/Repeater mode
Provides Security with 64/128-Bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
Supports 802.1x Authentication and MAC Address Control for Authorization Access (20 entries)
Supports Most Operating Systems, such as Windows 95/98/ME/NT/2000/XP, Unix and Mac
Allow Users to Disable ESSID Broadcast to Increase Wireless Security
Built-in 10/100Mbps Auto-Sensing Fast Ethernet Port
Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6 Mbps for 802.11g
Dynamic Data Rate Scaling at 11, 5.5, 2 and 1 Mbps for 802.11b
Allow Auto Fallback Data Rate for Optimized Reliability, Throughput and Transmission Range
2dBi Detachable Diversity Antenna. Replace with Optional High-Gain Antenna to Extend the Range/Coverage Area.
Easy Configuration and Maintenance with Web Browser (HTTP)
Flash Memory for Firmware Upgrade and Save/Restore Settings
Distance coverage 50 to100 meters indoor, 100 to 300 meters outdoor depending on the environment
3-Year Warranty
FEATURES
NEW
IMPLEMENTS
RoHS compliant
New Housing
New Standard GUI
Add McAfee Bonus
Chipset > Realtek 8186+8225