TRENDnet TDM-E400 - Manual (Page 182)

TDM-E400 / TDM-C400 ADSL2+ Ethernet Modem Router User’s Manual
182
attempt to your LAN HTTP server rather than to the HTTP
server on the Ethernet Modem Router .
Thereafter, when your ISP wants to log on to your Web
Configuration, they would type your IP address in their
browser, followed by a colon and the non-standard port
number, as shown in this example:
http://10.0.1.16:61000
Your ISP may also have special circumstances that require
changing the port numbers; contact them before making any
changes here.
Follow these steps to modify port settings:
1. Log into Web Configuration, click the Admin tab, and then
click Port Settings in the task bar.
The Port Settings page is shown in Figure 85.
Figure 85. Port Settings Page
2. Type the new port number(s) in the appropriate text box(es)
and click .
The default port numbers are shown in Figure 85. You can
enter non-standard port numbers in the range 61000-62000.
3. Click
Commit & Reboot in the task bar, and click
to save your changes to permanent memory.
4. On the Commit & Reboot page, click .
Note that the new settings will not be effective until you reboot the
system.