Testing your setup – TRENDnet TDM-E400 User Manual
Page 37
Chapter 2. Quick Start
37
Testing Your Setup
The Quick Start process should enable any computer on your LAN
to use the Ethernet Modem Router to access the Internet.
To test the connection, turn on the device, wait about 30 seconds,
and then verify that its LEDs are illuminated as described in Table 2.
Table 2. LED Indicators
Label
LED
Status
Color
Description
1
PWR
ON
Green
Power supply is
connected.
Blinking Green Training
with
DSLAM.
2
WAN
ON
Green
ADSL link is ready.
ON
Green
PPP sync up
3
PPP
Blinking Green Data
transmitting
4
LAN ON
Green
Ethernet transmitting
5
USB (LAN)
(For Ethernet/USB
Combo only
)
ON
Green
USB port is connected
If the LEDs illuminate as expected, test your Internet connection
from a LAN computer (and from the USB computer, if applicable):
Open your web browser and type the URL of any external website
(such as
). The LED labeled PPP should be
blinking rapidly and may appear solid as the
device
connects to the
site.
If the LEDs do not illuminate as expected or the web page does not
display, see Appendix A for troubleshooting suggestions. Or,
contact your ISP for assistance.