Toshiba SL-5300 Series - Manual (Page 98)

15. SET UP MODE EO1-31009
15.2 Label Format Setting
15- 3
Procedure
Item Procedure
Date 1. Input the date in order of Month-Date-Year with 2-digit number each.
2. Touch Date area.
24 hours/12 hours,
AM/PM 1. Touch either 24 hours or 12 hours area.
2. When 12 hours is selected, touch either AM or PM area, also.
NOTE: When the Time has been already programmed in 24-hour system,
AM or PM is automatically selected.
Time 1. Input the time in order of Hour-Minute with 2-digit number each.
2. Touch the Time area.
NOTE: When 12 hours is selected, the time should range from 00:00 to
11:59.
Machine No. 1. Input a machine No. (0 – 999999)
2. Touch Machine No. area.
Store code 1. Input a store code (0 – 99999).
2. Touch Store code area.
15.2 Label Format Setting
You can set the detailed settings for each label format, such as, the issue mode, sensor sensitivity,
sensor type, feed amount, print tone, and print position.
The following screen will appear when the [Label format] key of the Set up menu is touched.
NOTE: When an invalid label format No. is input, the message “This format is not selectable” will be
displayed. To clear the error, touch anywhere on the screen.
Format No. area
Feed Length
area
Sensor sensibility
Print density area
Print type
On demand
Batch
Variable
Sensor type
Front Label sensor
Transparent sensor
Preprint
Label length area
Gap area
Label width area
X position fine
adjustment area
TEST PRINT key FORMAT RESET key
FORMAT PRINT key
SORT key
FREE FORMAT key
FORMAT LIST key
FORMAT COPY key
Format Name area