Toshiba SL-5300 Series - Manual (Page 142)

15. SET UP MODE EO1-31009
15.6 Password Assignment
15-47
15.6 Password Assignment
The total of 4 different passwords can be programmed with this menu. You can assign these
passwords to the operating modes as you like.
The following screen will appear when the [Password assignment] key of the Set up menu is touched.
Key Functions
Key Function
RESET Used to reset the passwords to the initial status.
Procedure
Item Procedure
Setting a password to the
desired operation mode. 1. Touch the mode key(s) on the top row that you desire to protect by
password.
2. Input a 4-digit number (0000 - 9999) and touch the desired password
display area(s) (PASSWORD 1 to PASSWORD 4, or MASTER).
NOTE: 0000 is the default setting.
3. Select the mode to be protected by the password by touching the
mode key(s) on the same row.
Resetting the password 1. Touch the [RESET] key.
2. The passwords are reset to the initial status.
NOTES:
1. Regarding the master password, contact the nearest TOSHIBA TEC service representative or sales
agent.
2. The mode protected by the password is shown on the main menu screen with a key symbol.
3. The master password can be used to enter all the protected modes.
4. It is possible to omit “0” (zero(s)) when inputting a password beginning with “0” (zero(s)).
E.g.) “1” for “0001”, “53” for “0053”, “123” for “0123”
Protect Mode area
PASSWORD 1
PASSWORD 2
PASSWORD 3
PASSWORD 4
MASTER PASSWORD
Scale Mode
Selection area
RESET key