Toshiba SL-5300 Series User Manual

Page 41

14. PROGRAMMING MODE

EO1-31009

14.2 PLU Data Setting

14- 6

Item Procedure

Auto Code,
UPC

To set the auto code:
1. Touch the Auto code area.
2. The auto code setting screen will appear.
3. Input an Auto code (max. 6 digits).
4. Touch the [Decision] key.

To set the UPC:
1. Input a UPC (max. 6 digits).
2. Touch the UPC area.

NOTES:
1. Default: 000000
2. When the auto code has been entered, the UPC will become the same
number with the auto code.
3. When asterisks (*) are included in the auto code, the input code for UPC
can displace them, selected from the lowest digit. See the examples below.
Example 1: Auto code = 123***, Input code for UPC = 6543

Example 2: Auto code = 98**54, Input code for UPC = 0211

Unit price

1. Input a 4-digit number.
2. Touch the “1

Price” area.

NOTE: The 2

Price cannot be used at present.

Unit price flag

In case of the lb scale (US model):
Select “per 1lb”, ‘per 1/2 lb”, or “per 1/4lb”.

In case of the kg scale (CA model):
Select “per 1kg” or “per 100g”.

NOTE: Only “per 1kg” is selectable unless the initial settings are changed.
When “per 100g” is required, please contact the nearest TOSHIBA TEC
service representative or sales agent.

Mode flag

Select “WEIGH”, “FIX”, or “BY-COUNT”.

NOTE: When “BY-COUNT” is selected, the “PIECES” area will need a
numeric data. Input the number for the “PIECES” area.

Decision key

Asterisk key