Toshiba SL-5300 Series - Manual (Page 90)

14. PROGRAMMING MODE EO1-31009
14.18 Inline (LAN Master/Satellite System) Setting
14-55
14.18 Inline (LAN Master/Satellite System) Setting
You can change the INLINE/OFFLINE setting, designate the scale to be a master or a satellite, and set
the IP address.
NOTE: To use the master/satellite designation and IP address setting, the IP address should have been
set in the System Mode. For the System Mode settings, please contact your nearest TOSHIBA TEC
service representative or sales agent.
The following screen will appear when the [Inline (LAN)] key of the Programming Mode Main Menu is
touched. When the [MASTER] or [SATELLITE] key is touched, the IP Address screen will appear.
Key Functions
Key Function
OFF LINE Used to set the scale to off line.
MASTER Used to designate the scale to a master.
SATELLITE Used to designate the scale to a satellite.
IP Address area
This IP address is programmed in
system mode. When IP is not
programmed, no IP appears and
cannot declare
MASTER/SATELLITE.
OFF LINE key
MASTER key
SATELLITE key
MASTER SATELLITE
IP Address (Master)
IP Address (Satellite)
IP Address (Master)
IP Address (Satellite)