Toshiba SL-5300 Series - Manual (Page 97)

15. SET UP MODE EO1-31009
15.1 Date/Time Setting
15- 2
Set Up Mode Menu
Item Function Refer to
Initial set This item is intended for the service personnel. DO NOT change
the initial settings. -----
Date/Time Date, time, machine number, and store code are programmable. Section 15.1
Label format Various print formats are programmable. Section 15.2
Barcode Bar code formats are programmable. Section 15.3
Memory card Data can be read from/written on a memory card. Section 15.4
PLU Data
maintenance Each of the already programmed PLU data can be changed at
the same time. Section 15.5
Password
assignment Password to enter each operating mode is programmable. Section 15.6
Wireless LAN Various parameters, transmission rate, etc. are programmable,
the status, such as, radio level/noise level are displayed, and a
communication test is performed. Section 15.7
15.1 Date/Time Setting
You can set the date/time, machine number, and store code with this menu.
The following screen will appear when the [Date/Time] key of the Set up menu is touched.
Time Area
Machine No. area
Store Code area
AM/PM key
24 hours/12 hours key