Toshiba SL-5300 Series - Manual (Page 221)

24. ERROR MESSAGE TABLE EO1-31009
24. ERROR MESSAGE TABLE
24- 3
(Continued)
Error Message Cause Solution
This makes Print Field
be gone. Print field may be gone by operations
such as reducing label length.
•
Set the print position correctly.
•
Delete the print field data.
Data is over the File
capacity.
Please perform
Initialize except
standard Format.
There is no vacant area in Flash-ROM for
label format files.
•
Sort the files by the [SORT] key
•
Initialize the format files.
UP. Discount value is
incorrect. FSP discount unit price exceeds the
regular unit price. Set the FSP discount unit price being
cheaper than the regular unit price.
Input code is out of
range. The Start Code exceeds the End Code. Re-program the Start Code and the End
Code correctly.
Vendor is not found. The selected vendor name doesn’t exist. Program the vendor name and the
Number.
FC is in busy. Local communication error.
•
Wait a moment.
•
Turn on the backup master scale, and
then check the connection and the
communication setting regarding local
communication.
FC Timeout Error
occurs. Local communication error.
Master scale is in busy.
Turn on the backup master scale, and
then check the connection and the
communication setting regarding local
communication.
Deleting of PLU is
prohibited before
Reset. The selected PLU total memory is not
reset. Reset the PLU total memory, and then
delete the PLU.
Tare required. Tare is not set before label issuing in
compulsory tare mode. Subtract the tare, and then enter the PLU
data.
%Tare Weight over. The % tare weight is over the maximum
limit.
•
Reduce the quantity of items to be
weighed.
•
Make sure the % tare weight.
Scale failed in
transmission of Data. Because of communication error, the data
in the satellite scale in OFF-LINE mode
cannot be transmitted to the master scale. Turn on the backup master scale, and
then check the connection and the
communication setting regarding local
communication.