Toshiba SL-5300 Series - Manual (Page 103)

15. SET UP MODE EO1-31009
15.2 Label Format Setting
15- 8
Key Functions
Key Function
HOME Used to restore the print item to the initial position.
Used to fine adjust the print position. One touch of these keys causes 0.125
mm change.
NEXT ITEM/
LAST ITEM Used to select the item to be adjusted.
ROTATION Used to change the rotation of the print item. One touch of this key causes the
print item to turn clockwise by 90 degrees. When the print item cannot be
rotated, a buzzer sounds.
FORMAT PRINT Used to print the label format displayed on the format image area.
Procedure
Item Procedure
Changing the type No. 1. Input a type number.
2. Touch the Type area.
NOTE: When an improper number is input, a buzzer sounds or an error
occurs. The effective type number depends on the format No. or Item.
Showing the Type
Explanation screen 1. Touch Explanation area.
2. The print item’s format list is shown. (Refer to the Format Type List
screen.)
NOTE: The format type can be changed from this list. When changed, the
type No. is also changed accordingly.
Changing X or Y position 1. Input a value.
2. Touch the X or Y area.
Or,
1. Touch the location on the screen where you desire to position the
print item.
NOTE: Programmable value range depends on the format No. or Item.
(Unit: 0.125 mm)
Setting the number of lines
for the Ingredient 1. Input a value. (Max. 38 lines)
2. Touch the Line ct. area.
NOTE: The acceptable value depends on the label size.
Setting the logo print size 1. Input a value.
2. Touch the X or Y area.
NOTE: Regarding the logo print size, refer to Section 14.2.