Toshiba SL-5300 Series - Manual (Page 17)

7. TURNING THE POWER ON/OFF EO1-31009
7.1 Turning the Power ON
7- 1
7. TURNING THE POWER ON/OFF
7.1 Turning the Power ON
1. Make sure that the power plug is fully inserted into the AC outlet.
2. Make sure that nothing is placed on the platter, and then turn ON the power switch.
NOTE: While the power switch is ON, the memory backup battery is charged. Therefore, data in the
memory may be deleted if the battery voltage drops. Consult your TOSHIBA TEC service
representative in case the scale will not be used for a long period of time (more than 30 days).
3. The last display before turning OFF the switch follows about 10-second scanning display.
NOTE: If the power does not turn on or an error message appears, refer to Section 23,
TROUBLESHOOTING or Section 24, ERROR MESSAGE TABLE.
Power Switch