Toshiba SL-5300 Series - Manual (Page 166)

16. REGISTRATION MODE EO1-31009
16.2 Basic Operations
16-20
4. The acceptable range of the tare (initial status)
US model: 0.005 to 2.000 lbs
CA mode: 0.002 to 1.000 kg
5. The above NOTES 1 to 4 are the factory default functions. When you desire to change them, please
contact the nearest TOSHIBA TEC service representative or sales agent.
Preset Tare Subtraction
1. Call the PLU. (Regarding how to call PLUs, refer to Section 16.2.2.) If the preset tare needs to be
changed, go to Step 3.
Example: Preset tare is 0.200 lbs
2. Place a commodity on the platter. A label is issued (AUTO) or touch the [PRT/*] key (MANUAL).
3. If you desire to change the preset tare, touch the [TARE] key or Tare area. And then, input a new
tare and touch the [TARE] key or Tare area. (e.g.: 0.100 lbs)
TARE area
TARE key
PRT/* key