Toshiba SL-5300 Series - Manual (Page 175)

16. REGISTRATION MODE EO1-31009
16.2 Basic Operations
16-29
16.2.9 Label Issue Count Setting
You can set the total number of labels to be issued with this menu.
NOTE: This function can be used in the Weigh and Fix operations.
1. When
the [PRESET COUNT] key of the Registration Mode initial screen is touched, the Preset
Count Setting screen will appear.
2. Input the number of labels to be issued (max. 99) with the numeric keys.
3. Touch the Preset area (green).
NOTES:
1. The entered number here will not be cleared by
calling another PLU.
2. The remaining number of labels is displayed on the
Balance area.
3. When the remaining number of labels becomes 0,
the Preset Count Setting screen will automatically
appear.
4. Touching the [CLEAR] key or [0] key clears both
Preset and Balance areas.
5. The preset count is automatically cleared when the
Registration Mode is terminated or the power is
turned off.
6. Touching the [Nutrition Label] key allows you to
set the number of nutrition facts labels.
PRESET COUNT key
Preset area
Numeric keys
Preset Count Setting screen
Nutrition Label key
CLEAR key
Balance area