Toshiba SL-5300 Series - Manual (Page 15)

5. INSERTING THE POWER CORD EO1-31009
5. INSERTING THE POWER CORD
5- 1
5. INSERTING THE POWER CORD
1. Make sure that the power switch is in the OFF position.
2. Insert the power plug into the AC outlet completely.
WARNING!
1. Be sure to insert the power plug into the rated outlet. Failure to do this may cause fire or electric
shock.
2. Do not share the same outlet with any other electrical appliances or do not use an extension cord.
Over capacity may cause fire or electric shock.
3. Do not excessively bend, pull on, damage, place a heavy object on, or heat the power cord.
Damaged power cord may cause fire or electric shock.
4. Do not plug in or unplug the power cord with wet hands, as this may cause an electric shock.
5. Be sure to fully insert the power plug into the AC outlet. Failure to do this may cause fire or electric
shock.
6. Be sure to hold and pull on the plug when disconnecting the power cord. Pulling on the cord instead
of the plug may break the internal wires, which may cause fire or electric shock.
7. Clean the plug for a few times a year. The power plug may collect dirt and this may cause fire.
CAUTION!
1. Do not share the AC outlet with any other electrical appliances that consume a large amount of
power. Doing so may affect the operation of this machine as the voltage will fluctuate widely each
time these appliances operate.
2. Be sure to turn OFF the power before plug in the power cord. Failure to do this may cause a short-
circuit resulting in a machine failure.
AC Outlet
Power Plug