Yamaha PSR-4000 - Manual (Page 95)

91
Disk Operations
The LCD [▲/▼] controls can now be used to
select the type(s) of data to be loaded from the
selected file. Data types which are turned
ON are
loaded.
SETUP
STYLE
REVOICE
MULTI
PAD
REGIST-
RATION
CUSTOM
STYLE
CUSTOM
VOICE
All setup data — see list on page 131.
All STYLE REVOICE settings - page
108.
All MULTI PAD phrase, percussion,
and chord data - page 36.
All REGISTRATION memory data -
page 131.
All CUSTOM STYLE data - page 69.
All CUSTOM VOICE data - page 78.
Press the LIST LCD button when you want to go
back to the FILE LIST display.
If you want to load an individual registration,
style, or voice, press the INDIVIDUAL LCD but-
ton.
In the INDIVIDUAL LOAD display use the
DATA LCD [▲/▼] control to select REGIST, STYLE
or
VOICE, the CONTENT LCD [▲/▼] controls to
select the individual file to be loaded, and the DEST.
REGIST, CUSTOM STYLE, or CUSTOM VOICE
LCD [▲/▼] controls to select the destination for the
selected individual file.
When the INDIVIDUAL mode is selected and
STYLE is selected for loading, a PRE-LOAD LIS-
TEN LCD button appears which lets you listen to the
style before actually loading it. The
PRE-LOAD
LISTEN function will not work if there is too much
style data, however.
Press the LIST LCD button when you want to go
back to the FILE LIST display.
When the file and data types have been specified,
press the EXECUTE LCD button to actually begin
the load operation — the “OK to load?” confirma-
tion display will appear.
If you want to execute the load operation press
the YES LCD button (or press the NO LCD button
to cancel the operation). “Don’t remove disk” will
appear while the data is being loaded, and the
progress of the load operation will be indicated by a
bar graph on the display.
NOTES
• Data spanning two or more disks (i.e. “split” data) cannot be
loaded by using the INDIVIDUAL LOAD function.
• When loading CUSTOM STYLE or CUSTOM VOICE data — not
in the INDIVIDUAL mode — all data will be loaded even if the
loaded file contains empty styles or voices.
• In the case of the custom style load function, SFF (optional style
file format) disks can also be loaded.