Yamaha PSR-4000 - Manual (Page 94)

90
Disk Operations
The PSR-4000 [DISK] button accesses a range of functions that are used
for storage and retrieval of floppy disk data. To select a disk operation first
press the [DISK] button, then press the LCD button corresponding to the
operation you want to perform.
If the FILE LIST display shown to the right is
not showing, press the LIST LCD button to select it.
Use the FILE LCD [▲/▼] controls to select the file
to load. The name of the selected file is displayed to
the right of the file number, and the size of the file
appears to the right of the file name in kilobytes
(approximate).
If you want to select a specific type of data to
load, press the PROGRAM LCD button.
Loads the specified file from a floppy disk inserted into the PSR-4000 disk drive.
Load From Disk
NOTES
• Please note that no other PSR-4000 functions will operate while a disk
function is in progress.
• For any disk operation an appropriate floppy disk must first be properly
inserted into the PSR-4000 disk drive. The PSR-4000 uses only 3.5"
2DD and 2HD type floppy disks. Make sure the disk write protect tab
is set to the “write enable” position if you intend to save any data to the
disk, and insert the disk with the sliding disk cover facing the disk drive
and the disk label facing upward. Before a new disk can be used to
save data, it must be formatted using the “FORMAT FD” function
described on page 96.
• If you select a disk function when no disk is present in the drive, the
“No disk! Please insert a disk.” error message will appear on the
display.
Write protect tab
closed (unlocked
— write enabled)
SONG
PLAY
CUSTOM
VOICE EDIT FUNCTION
SONG
RECORD
CUSTOM
ACCOMP. REC DISK