Song playback & recording – Yamaha PSR-4000 User Manual
Page 72

68
■
INITIAL EDIT
.....................................................................................................................................................................................
Song Playback & Recording
■
SONG DELETE
...............................................................................................................................................................................
Allows the initial REVERB DEPTH, CHORUS DEPTH, and DSP EFFECT depth settings for each track to be
edited as required.
Z
Select a Track & Set the Depth Param-
eters
Use the
TRACK LCD [▲/▼] control to select a
track, and the
REVERB, CHORUS, and DSP EF-
FECT LCD [▲/▼] controls to set the corresponding
depth parameters as required. Only tracks which
contain data can be selected for editing.
X
Enter the Edited Data
Press the
EXECUTE button. “Executing” will
appear on the display while the data is being up-
dated. After execution the
EXECUTE button changes
to an
UNDO button which can be used to undo the
initial edit operation if the results are not satisfac-
tory.
This function deletes the specified song file from the disk.
NOTES
• The song currently being recorded cannot be deleted.
• The amount of remaining disk space is displayed in the
upper right corner of the display in approximate kilobytes
while recording or playback is stopped.
Z
Select a Song
Use the
SONG LCD [▲/▼] controls to select the
song to be deleted.
X
Delete the Song
Press the
EXECUTE LCD button. The “Ready to
Delete ********. OK to delete?” confirmation
message will appear (“********” is the song name).
Press
YES to delete the song or NO to cancel.