Song playback & recording x – Yamaha PSR-4000 User Manual

Page 68

Song Playback & Recording

Select a Start Trigger Type

.................................................................................................................................................

Use the

TRIGGER LCD [▲/▼] controls to se-

lect the

FIRST KEY or START SW start trigger.

When

FIRST KEY is selected recording will begin

when the first key is played on the keyboard. When
START SW is selected recording will begin when
the

START LCD button or panel [START/STOP]

button is pressed. If a footswitch has been assigned
to the PUNCH IN/OUT function via the F3 CON-
TROLLER: FOOT CONTROLLER display (page
104),

FOOT SW can also be selected via the TRIG-

GER LCD [▲/▼] controls.

Turn the Metronome On If Required

.......................................................................................................................

Use the

METRONOME LCD [▲/▼] control to

turn the metronome

ON if you want to record while

monitoring the metronome sound (the metronome
sound is not recorded).

Locate the Punch In Point

........................

While the

PLAY mode is selected play the song

and pause playback a few measures before the
punch-in point so you have a good “lead in” prior to
actually starting recording.

Engage the Record Mode

...................................................................................................................................................

Use the

MODE LCD [▲/▼] controls to select

the

REC mode.