Yamaha PSR-4000 - Manual (Page 112)

108
This function allows you to “revoice” the currently selected style: i.e.
change the volume, voice, reverb depth, and chorus depth settings for
each accompaniment part. Style Revoice settings are retained in
memory if the MEMORY BACKUP parameter in the F7 UTILITY page
is ON as long as a good set of backup batteries is installed.
F4: Style Revoice
● VOLUME OFFSET
Use the RHY1, RHY2, BASS, CHD1, CHD2,
PAD, PHR1, and PHR2 LCD [▲/▼] controls to set
the volume offset for the corresponding accompani-
ment parts. The volume offset range is from “–50”
to “+50”. These settings are relative to the volume
parameters available via the ACCOMPANIMENT
VOLUME MIXER display. The amount of volume
offset set for each part is shown by a graphic volume
bar to the right of the
VOLUME parameter in the
upper section of the display. Press the RECALL
PRESET DATA LCD button to recall all preset
volume offset settings (all “0”).
● VOICE
Use the [ ] LCD button to switch between the
RHY1/RHY2/BASS/CHD1 and CHD2/PAD/PHR1/
PHR2 parameter groups. Use the GROUP LCD [▲/
▼] controls for each part to select the voice group,
and the ▲/▼ LCD [▲/▼] controls to select the
individual voice for that part. Select “– –” to specify
the preset voice for any individual part. When the
preset voice is selected a “
P” appears in the corre-
sponding box to the right of the VOLUME param-
eter in the upper section of the display. A “ V”
appears when a non-preset voice has been specified.
Press the
RECALL PRESET DATA LCD button to
recall all preset voices.