Yamaha PSR-4000 - Manual (Page 118)

114
F6: Harmony/Registration
■
HARMONY
...........................................................................................................................................................................................
Selects the type of harmony to be applied when
the [HARMONY] button is turned on (page 33),
and the volume of the harmony sound.
Use the TYPE LCD [▲/▼] controls to select the
desired harmony type. Use the VOLUME LCD [▲/
▼] control to set the volume of the harmony sound.
The Harmony Types
1. Duet
2. Trio
3. 4 Part
4. 4 Part Jazz
5. Country
6. Octave
7. Tremolo Slow
8. Tremolo Fast 9. Tremolo Duet
10. Strumming
11. BackingVocal
12. Add Trp.&Sax
13. Add Strings
14. Gtr. Picking
15. Banjo Player
16. In The Forest
■
REGISTRATION
.............................................................................................................................................................................
● NAME
You can enter descriptive names up to 16 charac-
ters in length for each registration setup via the
NAME function. The name entered is applied to the
currently selected registration setup.
If necessary, begin by select the desired registration
bank ad number. Use the < > LCD [▲/▼] controls to
move the name cursor to the various character posi-
tions, then use the
A~Z, a~z, or 0~9… LCD [▲/▼]
control to select the required character for each posi-
tion. The
A~Z LCD [▲/▼] control selects capital
letters, the a~z LCD [▲/▼] control selects lower-
case letters, and the 0~9… LCD [▲/▼] control se-
lects numbers and special characters.
NOTES
• It’s a good idea to give your registration setups names that
make them easily identifiable. If you’ve created a registra-
tion setup for a song named “MySong”, a good registration
name might be something like “MySong-Reg”.
● FREEZE GROUP SETTING
You can specify which settings are affected by
the FREEZE function via the FREEZE GROUP
SETTING function.
Use the GROUP SELECT LCD [▲/▼] controls
to select a setting you want to freeze or “un-freeze”,
then use the
MARK LCD [▲/▼] control to set or
remove the check mark for that setting. Repeat until
all settings are marked or un-marked as required.
NOTES
• The HARMONY feature cannot be turned on when the FULL
KEYBOARD ABC mode is selected.