Yamaha PSR-4000 - Manual (Page 114)

110
F5: Reverb/Chorus/DSP Effect
The PSR-4000 has 16 reverb-based effects, a chorus effect, and 50
DSP (Digital Signal Processor) effects that can be selected via the
REVERB/CHORUS/DSP EFFECT function display. The selected
reverb, chorus, and DSP effect settings are applied to the sound when
the [REVERB], [CHORUS], and [DSP EFFECT] buttons are used (see
page34).
■
REVERB TYPE & DEPTH
.....................................................................................................................................................
● REVERB TYPE
Selects the reverb type.
If the
REVERB TYPE parameters are not show-
ing on the lower section of the display, press the
TYPE LCD button. Use the LCD [▲/▼] controls to
select the desired reverb effect. The name of the
current reverb type is shown to the right of the
REVERB TYPE parameter in the upper section of
the display.
The Reverb Effects
1 Hall 1 9 Stage 1
2 Hall 2 10 Stage 2
3 Hall 3 11 Plate 1
4 Hall 4 12 Plate 2
5 Room 1 13 White Room
6 Room 2 14 Tunnel
7 Room 3 15 Canyon
8 Room 4 16 Basement
NOTES
• Try out all of the effects to get a feel for what they can do
to your sound.
• When a new style is selected, an appropriate reverb type
for that style is automatically selected.