Yamaha PSR-4000 - Manual (Page 101)

97
Disk Operations
When the source song has been selected press the
DESTINATION LCD button and use the DIR ▲▼
LCD [▲/▼] controls to select the destination disk.
Select “
another FD” to copy to a different floppy
disk, or “ FLOPPY DISK” to copy to the same
floppy disk.
Press the EXECUTE LCD button to begin the
copy operation. At this point the display shown
below will appear and you will have a chance to
change the song name before it is copied.
If you want to give the file to be copied an
original file name, be sure to do so before pressing
the
YES LCD button. File names can be up to 12
characters long. Use the < > LCD [▲/▼] control to
move the name cursor to the various character posi-
tions, then use the
A~Z or 0~9… LCD [▲/▼]
control to select the required character for each
position. The
A~Z LCD [▲/▼] control selects capi-
tal letters and the 0~9… LCD [▲/▼] control
selects numbers and special characters.
When you’re ready to execute the copy operation
press the YES LCD button (or press the NO LCD
button to cancel the operation). “Don’t remove disk”
will appear while the data is being copied. If you’re
copying to a different floppy disk the PSR-4000 will
prompt when to insert the copy destination disk.
Follow the on-screen instructions.