beautypg.com

Custom voice edit, Filter – Yamaha PSR-4000 User Manual

Page 90

background image

86

Custom Voice Edit

FILTER

.....................................................................................................................................................................................................

The

FILTER ENVELOPE LCD [/] controls

are used to set the filter envelope

RATE and LEVEL

parameters. Use the

RATE or LEVEL LCD button to

select the corresponding group of parameters.

RATE

Set the rate of cutoff frequency variation. Higher

values produce faster variation.
A

TTACK

: Sets the speed of variation from key-on

(BRILLIANCE LEVEL) to the level set by the
ATTACK LEVEL parameter.

D

ECAY

1, D

ECAY

2, D

ECAY

3: Set the speed of varia-

tion between the attack level and the levels set by
the

LEVEL D

ECAY

1, D

ECAY

2, and D

ECAY

3 pa-

rameters, respectively.

R

ELEASE

1: Sets the rate of variation from the level at

key-release to the level set by the

LEVEL R

E-

LEASE

1 parameter when SUSTAIN is off.

R

ELEASE

2: Sets the rate of variation from the level

set by the

LEVEL R

ELEASE

1 parameter to that set

by the

LEVEL R

ELEASE

2 parameter when SUS-

TAIN is off.

S

USTAIN

: Sets the rate of variation from the level at

key-release to the level set by the

LEVEL S

US-

TAIN

parameter when SUSTAIN is on.

RESONANCE: Sets the amount of emphasis at the

cutoff frequency (resonance).

LEVEL

These parameters set the amount of variation

from the preset cutoff frequency. Level “0” is the
preset value.
A

TTACK

: Sets the attack level after key-on.

D

ECAY

1, D

ECAY

2, D

ECAY

3: Set the levels after

D

ECAY

1, D

ECAY

2, and D

ECAY

3 variation.

R

ELEASE

1, R

ELEASE

2: Set the levels after RATE

R

ELEASE

1 and R

ELEASE

2 variation after key-

release when SUSTAIN is off.

S

USTAIN

: Sets the level after

RATE S

USTAIN

varia-

tion after key-release when SUSTAIN is on.

BRILLIANCE: Sets the brilliance level.

NOTES

• If DRUM kit is selected , SUSTAIN parameters in the

AMPLITUDE ENVELOPE or FILTER ENVELOPE can-
not be changed.

• Some parameter settings may have minimal or no effect

with some voices.