Yamaha PSR-4000 - Manual (Page 55)

51
Song Playback & Recording
QUICK RECORD song
MULTITRACK RECORD song
DOC song
GM song
The number of volume parameters in the TRACK
VOLUME display will depend on the type of song
being played. If an original song recorded on the
PSR-4000 using the QUICK RECORD mode is
being played, two volume parameters will be avail-
able:
MANUAL and ACCOMP. If an original song
recorded on the PSR-4000 using the MULTITRACK
RECORD mode or a GM song is being played,
individual parameters for all 16 tracks will be avail-
able:
TR1 through TR16. Use the LCD [▲/▼]
controls to set the volume of the corresponding
tracks. If a Yamaha DOC song is being played use
the
RHY, BASS, ORCH, LEFT, and RIGHT LCD
[▲/▼] controls to set the volume of the correspond-
ing tracks (see the DOC or Disklavier software
manual for more details). If a Disklavier song is
being played use the
ORCH, LEFT, and RIGHT
LCD [▲/▼] controls to set the volume of the corre-
sponding tracks.
The LCD [▲/▼] controls in the TRACK MUTE
display allow PLAY, MUTE, or SOLO to be selected
for each track group. Muted tracks do not play. If a
track is set to SOLO only that track will play.
The track indicators above the volume or mute/
solo parameters indicate which tracks contain data
and which are muted. Tracks which do not contain
data are indicated by a dotted circle outline while
tracks which contain data have a solid outline. Play-
enabled tracks are indicated by a filled circle while
tracks that are muted are indicated by an outline
only.
NOTES
• When GM song is played all tracks appear on the display
as if they contain data, even if they don’t.