The freeze function, The freeze group settings – Yamaha PSR-4000 User Manual

Page 50

Registration Memory

The Freeze Function

If you press the [FREEZE] button so that its LED lights, selecting a

different registration setup will not change the settings specified in the
FREEZE GROUP SETTING display accessed either via the registration
EASY SETTING display or the [FUNCTION] button (page 114).

FREEZE

MEMORY

BANK 1~16

–

You can specify which settings are affected by the FREEZE function via the FREEZE GROUP SETTING

function accessible via the registration

EASY SETTING display. The same function is also available via the

FUNCTION display — page 114.

The Freeze Group Settings

Select the FREEZE GROUP SETTING Function

........................................................................................

Press the

EASY SETTING LCD button that ap-

pears when a BANK button or the [MEMORY]
button is pressed before it disappears. When the
easy setting display appears, select the

FREEZE

GROUP SETTING function by pressing the corre-
sponding LCD button.

Mark the Settings to be “Frozen”

.....

Use the

GROUP SELECT LCD [▲/▼] controls

to select a setting you want to freeze or “un-freeze”,
then use the

MARK LCD [▲/▼] control to set or

remove the check mark for that setting. Repeat until
all settings are marked or un-marked as required.

Exit When Done

.............................................................................................................................................................................

Press either the

EXIT LCD button or the panel

[EXIT] button when done.