Yamaha PSR-4000 - Manual (Page 113)

109
F4: Style Revoice
● REVERB DEPTH
Use the RHY1, RHY2, BASS, CHD1, CHD2,
PAD, PHR1, and PHR2 LCD [▲/▼] controls to set
the reverb depth for the corresponding accompani-
ment parts. The reverb depth range is from “0” (no
reverb) to “100” (maximum reverb), or “
PRESET”.
When the preset reverb depth is selected a “ P”
appears in the corresponding box to the right of the
REVERB parameter in the upper section of the
display. The reverb depth for each part which has a
non-preset setting is shown by a graphic depth bar to
the right of the
REVERB parameter in the upper
section of the display. Press the RECALL PRESET
DATA LCD button to recall all preset reverb depth
settings.
● CHORUS DEPTH
Use the RHY1, RHY2, BASS, CHD1, CHD2,
PAD, PHR1, and PHR2 LCD [▲/▼] controls to set
the chorus depth for the corresponding accompani-
ment parts. The chorus depth range is from “0” (no
chorus) to “100” (maximum chorus), or “
PRESET”.
When the preset chorus depth is selected a “ P”
appears in the corresponding box to the right of the
CHORUS parameter in the upper section of the
display. The chorus depth for each part which has a
non-preset setting is shown by a graphic depth bar to
the right of the
CHORUS parameter in the upper
section of the display. Press the RECALL PRESET
DATA LCD button to recall all preset chorus depth
settings.