The easy edit parameters, Custom voice edit, Edit – Yamaha PSR-4000 User Manual
Page 83
79
Custom Voice Edit
The Easy Edit Parameters
Use the [
] and [
] LCD buttons to the right of the display to select the
EDIT and STORE/CLEAR display
pages. Use the ▲ and ▼ buttons to the left of the display to select the various parameters within each page.
The
COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited
voice.
■
NAME
........................................................................................................................................................................................................
A name of up to 12 characters can be entered for
each custom voice. Use the < > LCD [▲/▼]
control to move the name cursor to the various
character positions, then use the
A~Z, a~z or
0~9… LCD [▲/▼] control to select the required
character for each position. The
A~Z LCD [▲/▼]
control selects capital letters, the
a~z LCD [▲/▼]
control selects lowercase letters, and
the
0~9… LCD [▲/▼] control selects numbers
and special characters.
■
PAN
....................................................................................
The
PAN LCD [▲/▼] control can be used to
position the voice in the center of the stereo sound
field, or to the left or right in 10 steps.
NOTES
• Depending upon the selected DSP EFFECT type, some
PAN parameters may not function.
EDIT
■
VIBRATO
......................................................................
Use the
DEPTH, SPEED and DELAY LCD [▲/
▼] controls to set up the vibrato effect. DELAY
produces a delay between the time a key is pressed
and the beginning of the vibrato effect. “0” is the
preset value for all parameters. “+” settings increase
while “–” settings decrease the range of the effect.
TIME