Oregon Scientific SE300 User Manual

Page 14

4. Repeat step 3 to change other settings:

Hour / Minute / Year / DD:MM or MM:DD date format / Month / Day.

NOTE The clock is programmed with a 50-year auto-calendar, which means
you do not need to reset the days of the week and dates each month.

ALARM

Your watch has an alarm that can be set to activate daily (Mon-Sun),
on weekdays (Mon-Fri), or on the weekend (Sat-Sun).
To set alarm:
1. Press MODE to enter
TIME Mode.

2. Press SET to select alarm.

3. Press and hold SET until the
ﬁrst setting is ﬂashing to enter
the setting mode for the alarm.

4. Press ST / SP / + or LAP / MEM / - to change the Daily, Weekday

or Weekend setting. Hold down for fast advancement. Press SET
to conﬁrm the setting and move on to the next one.

5. Repeat step 4 to change other settings: Hour / Minute.
6. The alarm will automatically be activated once you have ﬁnished

setting the alarm time.

To activate / deactivate the alarm:
1. Press MODE to enter TIME Mode.
2. Press SET to select alarm.
3. Press ST / SP / + or LAP / MEM / - to activate or deactivate the

alarm. The alarm icon

displays when the alarm is activated.

To turn the alarm sound off:
Press any key to turn the alarm sound off. The alarm will automatically
reset itself unless you deactivate it.

SE300_M_EN_USA.indd 13

8/31/06 12:13:04 PM