Roland VC-2 - Manual (Page 66)

66
Effects List
12: Hall 2
Simulates the reverberation in a concert hall. This is suitable
for simulating a smaller room, and produces a clear
reverberation.
13: Hall 3
Simulates the reverberation in a concert hall. This is suitable
for simulating a fairly large room, and produces reverberation
with a strong mid and low range.
Parameter Value Description
Pre Low Freq 50–4000 Hz Frequency of the low range
Pre Low Gain -15– +15 dB Gain of the low range
Pre Mid Freq 50–20000 Hz Frequency of the middle range
Pre Mid Q 0.5, 0.7, 1.0, 2.0,
4.0, 8.0 Width of the middle range
Set a higher value for Q to nar-
row the range to be affected.
Pre Mid Gain -15– +15 dB Gain of the middle range
Pre Hi Freq 2000–20000 Hz Frequency of the high range
Pre Hi Gain -15– +15 dB Gain of the high range
Rev Time 0.06–64.0 sec Duration (time) of the reverb
Pre Dly Time 0–200.0 ms Adjusts the delay time from the
direct sound until the reverb
sound is heard.
Density 0–99 Density of the reverb
Room Size 1–10 Size of the room which is simu-
lated
Early Ref Lev-
el 0–99 Volume level of the initial reflect-
ed sound
Low Damp
Freq 50–4000 Hz Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the re-
verb sound quicker than other
bands.
Low Damp
Gain -36–0 dB Degree of Low Damp
Hi Damp Freq 2000–20000 Hz Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first.
Hi Damp Gain -36–0 dB Degree of High Damp
Post HC Freq 160–15000 Hz,
THRU Frequency at which the high cut
filter will begin to take effect
(THRU: no filter is used)
Parameter Value Description
Pre Low Freq 50–4000 Hz Frequency of the low range
Pre Low Gain -15– +15 dB Gain of the low range
Pre Mid Freq 50–20000 Hz Frequency of the middle range
Pre Mid Q 0.5, 0.7, 1.0, 2.0,
4.0, 8.0 Width of the middle range
Set a higher value for Q to nar-
row the range to be affected.
Pre Mid Gain -15– +15 dB Gain of the middle range
Pre Hi Freq 2000–20000 Hz Frequency of the high range
Pre Hi Gain -15– +15 dB Gain of the high range
Rev Time 0.06–64.0 sec Duration (time) of the reverb
Pre Dly Time 0–200.0 ms Adjusts the delay time from the
direct sound until the reverb
sound is heard.
Density 0–99 Density of the reverb
Room Size 1–8 Size of the room which is simu-
lated
Early Ref Lev-
el 0–99 Volume level of the initial reflect-
ed sound
Release Densi-
ty 0–99 Density of the sound that reaches
the listener after many repeated
reflections
Low Damp
Freq 50–4000 Hz Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the re-
verb sound quicker than other
bands.
Low Damp
Gain -36–0 dB Degree of Low Damp
Hi Damp Freq 2000–20000 Hz Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first.
Hi Damp Gain -36–0 dB Degree of High Damp
Post HC Freq 160–15000 Hz,
THRU Frequency at which the high cut
filter will begin to take effect
(THRU: no filter is used)
vc2_for_XT_e1 66 ページ ２００５年３月８日 火曜日 午後４時５２分