Roland VC-2 - Manual (Page 29)

29
Creating/Editing Patches (Patch mode)
BENDER
Level
Pan
In the case of a patch whose patch algorithm is Keyboard~ ,
you can access the Wave screen by touching in the
lower part of the screen.
WAVE
Time 0–127 When portamento is used, this spec-
ifies the time over which the pitch
will change. Higher settings will
cause the pitch change to the next
note to take more time.
Parameter Value Explanation
Range 0–48 Specifies the degree of pitch change in
semitones when the Pitch Bend lever is all
the way left/right. For example if this is
set to “48” and you move the pitch bend
lever all the way to the left, the pitch will
fall 4 octaves. If this parameter is set to
“12,” the pitch will rise one octave when
the pitch bend lever is moved to the right-
most position.
Carrier Screen for Processor~
Patch Algorithms
TVA
Parameter Value Explanation
Level 0–127 Specifies the volume of the patch.
ModDepth -63–
+63 Adjusts the volume of the patch by the
controller assigned by
Controller (p. 31).
Parameter Value Explanation
Pan L64–
0–63R Specifies the pan of the patch. “L64” is
far left, “0” is center, and “63R” is far
right.
ModDepth -63–
+63 Adjusts the pan of the patch by the con-
troller assigned by
Controller (p. 31).
Parameter Value Explanation
Wave Screen
OSC
Parameter Value Explanation
Wave — Selects a preset or imported wave.
Tempo
Sync OFF,
ON Specifies whether the wave will be
sounded in sync with the tempo
clock (ON) or not (OFF).
Key Mode NORMAL,
ALWAYS NORMAL : Begin sounding when
you press a key, and stop sounding
when you release the key.
ALWAYS : Begin sounding when
you first press a key, and continue
sounding.
VARI
Parameter Value Explanation
Pitch -63–
+63 Adjusts the pitch.
ModDepth -63–
+63 Adjust the pitch using the controller as-
signed by
Controller (p. 31).
Time -63–
+63 This sets the range of change in playback
speed (time).
ModDepth -63–
+63 Adjust the range of change in playback
speed using the controller assigned by
Controller (p. 31).
Formant -63–
+63 This sets the range of change in vocal qual-
ity (formant).
ModDepth -63–
+63 Adjust the range of change in vocal quali-
ty using the controller assigned by
Con-
troller (p. 31).
TVA
Parameter Value Explanation
Level 0–127 Specifies the volume of the wave.
ModDepth -63–
+63 Adjust the volume of the wave using the
controller assigned by
Controller (p. 31).
vc2_for_XT_e1 29 ページ ２００５年３月８日 火曜日 午後４時５２分