Roland VC-2 - Manual (Page 19)

19
Try Out the Sound (Patch mode)
If the patch algorithm is Keyboard~
If the patch algorithm is Processor Type 1
If the patch algorithm is Processor Type 2
Parameter Value Explanation
Wave Level 0–127 Adjusts the output level of the wave to the
vocoder.
Carrier
Level 0–127 Adjusts the output level of the carrier to
the vocoder.
Carrier Re-
lease 0–127 Adjusts the release time of the carrier (the
time from when you release a key until the
sound disappears).
Vocoder
Formant
Type T00–
T15 Selects the type of vocoder formant.
Vocoder
Level 0–127 Adjusts the output level of the vocoder.
Vocoder
Natural
Voice 0–127 Adjusts the output level of the natural
voice (unprocessed sound of the wave).
Parameter Value Explanation
MIC Level 0–127 Adjusts the output level of the mic to the
vocoder.
Carrier
Level 0–127 Adjusts the output level of the carrier to
the vocoder.
Vocoder
Formant
Type T00–
T15 Selects the type of vocoder formant.
Vocoder
Level 0–127 Adjusts the output level of the vocoder.
Vocoder
Natural
Voice 0–127 Adjusts the output level of the natural
voice (your own unprocessed voice).
Parameter Value Explanation
MIC Level 0–127 Adjusts the output level of the mic to the
vocoder.
Carrier
Level 0–127 Adjusts the output level of the carrier to
the vocoder.
Vocoder
Tone 0–127 Adjusts the tone (brightness) of the vocod-
er.
Vocoder
Level 0–127 Adjusts the output level of the vocoder.
Vocoder
Natural
Voice 0–127 Adjusts the output level of the natural
voice (your own unprocessed voice).
vc2_for_XT_e1 19 ページ ２００５年３月８日 火曜日 午後４時５２分