Roland VC-2 - Manual (Page 34)

34
Using Waves (Wave Mode)
Never turn off the power of the V-Synth XT while
performing an operation in Wave mode. Doing so may
destroy the files.
1. Press [MODE].
The VC-2 MODE MENU window appears.
2. Touch .
The Wave screen appears.
You must save after performing operations in this screen.
When you touch
< Save > in the screen, the Disk Save
Project screen will appear, allowing you to save the
project from the work area onto the internal memory /
PC Card. For the rest of the procedure, refer to step 4 and
following of “
Saving a Project to Disk (Save Project) ”
(p. 40).
You can import individual wave files into the work area.
The data will be imported into unused wave numbers.
Importing is not possible if there are no empty wave
numbers.
1. Press [MODE].
The VC-2 MODE MENU window appears.
2. Touch .
The Wave screen appears.
3. Touch .
The Wave Import screen appears.
4. Touch if you want to import from internal
memory, or touch if you want to import
from a PC card.
5. From the file list, select the file/folder that you
want to import.
Here you can use the following functions. Touch the
appropriate button to execute.
Prevw: Preview (audition) the selected file (.wav/.aif).
Info: View information for the selected file.
Mark All: Mark all files/folders in the file list.
Mark: Mark the selected file/folder in the file list.
Open: Open the selected folder.
Close: Move to the next higher folder.
6. Touch .
A WARNING window appears.
If you want to cancel the procedure at this point, touch
.
7. Touch to execute the operation.
Importing Individual Wave
Files (Wave Import)
vc2_for_XT_e1 34 ページ ２００５年３月８日 火曜日 午後４時５２分