2 software features, Atm features, Services – RCA 608WL User Manual
Page 17: Software features, Chapter 1

Chapter 1
Your SpeedTouch™
E-DOC-CTC-20041126-0013 v1.0
15
1.1.2 Software Features
ATM features
ATM AAL5
Multiple Permanent Virtual Circuits (PVCs)
RFC1483 Bridging and Routing
RFC 2364 PPP over ATM
RFC 2516 PPP over Ethernet
Services
Transparent bridging (IEEE802.1D)
PPPoE routing/bridging
PPPoA routing, PPPoA to PPTP relaying
IP routing RIP
Full support for RIP
Hyper-NAT with virtual server mapping and NAPT Application Level Gateways
(ALGs)
Support for integration in MPLS networks:
Dedicated support for provider-provisioned PE-based MPLS networks:
Announcing of CPE IP address to a BGP-MPLS VPN using RIP
Advanced RIP route filtering capabilities to support simultaneously internet
access and MPLS VPN access using RIP.
Encryption over MPLS using IPSec
Monitoring from CPE to an MPLS VPN using PING & Traceroute MIB
Support of DHCP over MPLS VPNs using DHCP Relay
VLAN support:
VLAN aware bridging (IEEE 802.1q), with isolated or shared self-learning
bridged table per VLAN
VLAN tagging
Configurable VLAN priority re-mapping (IEEE 802.1p)
PVC mux/de-mux: One bridge port can be multiplexed / de-multiplexed
over multiple ATM PVCs, using a configurable policy, using VLAN priority
(IEEE 802.1p) to map packets to PVCs
Logical Ethernet concept:
Any physical Ethernet port can be configured as an isolated IP
interface (e.g. LAN, WAN, DMZ, Guest, ..) and/or as PPPoE client
Support of multiple IP interfaces (with different IEEE802.1q VLAN
IDs) on Ethernet ports and ATM PVCs
Quality of Service:
ATM QoS
IP QoS