RCA 608WL - Manual (Page 148)

Chapter 5
Expert Configuration
E-DOC-CTC-20041126-0013 v1.0
146
Adding an IP route To add an IP route:
1 Click New in the bottom row of the table
2 Specify the Destination IP prefix
3 If needed, select a packet-classification Label (in case the route applies for
classified packets)
4 Either specify the IP address of a directly connected Gateway OR select the
Interface
to which the route should apply (mutually exclusive).
5 Click Apply.
Deleting an IP route To delete an IP route:
1 Select the IP route you want to delete
2 Click Delete.
An IP prefix is the combination of an IP address and (sub)net mask and e.g.
192.6.11.150/24.