RCA 608WL - Manual (Page 136)

Chapter 5
Expert Configuration
E-DOC-CTC-20041126-0013 v1.0
134
Traceroute The Traceroute table provides a list of configured traceroute test entries.
By default no traceroute tests are configured. To add a traceroute test see
Add/
delete a traceroute test below.
Per traceroute test entry following information is shown in the table:
an intuitive Test name of the traceroute Test
the traceroute test entry Owner
the traceroute Target Address (host or IP address)
the traceroute test Status, being either:
Stopped
In Progress
Select a traceroute test entry to:
Modify traceroute test properties .
Perform a traceroute test and view test results and history (see traceroute tests
and results ).
Delete the entry (see Add/delete a traceroute test ).
Add/delete a
traceroute test
To add a traceroute test entry:
1 Click New (if an entry is currently selected, click Cancel first).
2 Type a name for the traceroute test entry.
3 Type the host name or IP address of the target to traceroute.
4 Click Apply.
To delete a traceroute test:
1 Select the traceroute test entry to delete.
2 Click Delete.
Modify traceroute test
properties
To modify a traceroute test entry:
1 Select the traceroute test entry.
2 Click Modify.