Name and functions of jack and connectors (at-60s) – Roland AT90S User Manual
Page 181
179
Chapter 10 Connecting with External Device
Name and Functions of Jack and Connectors (AT-60S)
The functions of the jacks on the bottom of the keyboard are described below.
1.
Phones Jack →
2.
Mic Volume Knob → p. 20
3.
Mic In Jack → p. 20
4.
LCD Contrast Knob
Adjust the brightness of the touch panel.
5.
Computer Connector
You can connect a computer to the AT-60S and exchange
performance data between the two.
6.
Computer Switch
Set this switch to Mac, PC-1, or PC-2 according to the
type computer that’s connected. Additionally, this
switches between MIDI In connector and the Computer
connector.
7.
MIDI In/Out Connectors
You can connect external MIDI devices to the AT-60S
and exchange performance data between them.
8.
Input switch → (p. 180)
9.
Input L(mono)/R Jacks
Using this jack, you can connect other sound generating
devices or audio equipment and play sounds from other
devices through the AT-60S’s speaker.
10.
Output L(mono)/R Jacks
You can some sounds if you connect speakers or other
audio equipment to these jacks. You can also hook up a
cassette recorder to record your performances.
Computer
PC-1
Mac
PC-2
MIDI
Out
In
MIDI
L (mono)
R
Input
Normal
RSS
L (mono)
R
Output
Contrast
LCD
Phones
Max
Min
Mic
Volume
In
5
7
6
8
1
3
2
4
9
10