Roland AT90S - Manual (Page 145)

143
Chapter 7 Recording/Playing Back What You Play
Re-Recording Part of Your
Performance (Punch-in
Recording)
After you have recorded a performance, you can re-record a
specified portion of the performance.
With this method, you listen to the recorded performance,
and re-record just the desired area. This recording method is
called “Punch-in Recording.”
1. Touch on the Main screen.
The Rec/Play screen appears.
2. Touch .
The Utility screen appears.
fig.07-
3. Touch .
The Punch In/Out screen appears.
fig.07-
4. Touch the “From” value (the measure at which
recording will begin).
fig.07-
5. Touch < >< > to specify “From” (the
measure at which recording will begin).
6. Touch the “For” value (the number of measures
that will be re-recorded).
7. Touch < >< > to set “For” (the number of
measures that will be re-recorded).
8. Touch .
The Rec/Play screen appears, and the unit is placed in
recording standby.
9. Press the Track button which you wish to re-
record (indicator flashes).
10. Touch to begin recording.
When you touch the button, the metronome will
play two measures (bars) of count-in before recording
begins.
When you reach the first measure of the specified area,
recording will begin. When the specified area ends,
recording will end, and playback will resume.
While the song is playing back or recording, the
Composer [Rec] button’s indicator will be lit as follows.
When recording has ended for the specified area and the
data is once again playing back, the [Rec] button’s
indicator will resume flashing.
11. Touch to stop the recording.
The indicator of the track button which recorded the
performance will light.
While the performance is
playing back The Composer [Rec] but-
ton’s indicator will flash
While you are re-record-
ing
The Composer [Rec] but-
ton’s indicator will light
constantly
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence