Roland AT90S - Manual (Page 163)

161
Chapter 9 Various Other Settings
■ Using the Foot Switch to Switch
Registrations
You can use the Foot Switch as a dedicated switch for
selecting Registrations in order.
1. Touch on the Main screen.
The sub-window appears.
2. In the sub-window, touch .
The Controller screen appears.
3. Touch < >< > to display the Regist Shift.
4. Touch the Regist Shift setting.
5. Touch < >< > to change the setting.
6. Touch .
If Regist Shift is turned RIGHT or LEFT, each time you
press the Foot Switch, the Registrations will be selected
in the following order: 1 → 2 → 3 → ... 12 → 1.. etc.
This setting remains stored in memory even while the power
is turned off.
■ Selecting the Range of Keys to
Which the Damper Pedal will
Apply
You can specify which keyboard will be affected when you
press the Damper (Sustain) pedal.
1. Touch on the Main screen.
The sub-window appears.
2. In the sub-window, touch .
The Controller screen appears.
3. Touch < >< > to display the Damper Pedal.
4. Touch the Damper Pedal setting to switch
between “to UPPER” and “to LOWER.”
Each time you touch the Damper Pedal setting, it will
alternate between “UPPER” and “LOWER.”
5. Touch .
NOTE
If the voice is a percussive voice (such as a Piano voice), the
tone will be sustained, but fade away just like an acoustic
piano. Is the voice is a non-percussive instrument (such as a
String voice), the tone will be sustained as long as the pedal
is depressed.
Setting Descriptions
OFF
You can use a function assigned to the
foot switch.
RIGHT
The right foot switch is dedicated to
switching registrations. The function as-
signed to the right foot switch cannot be
used.
LEFT
The left foot switch is dedicated to
switching registrations. The function as-
signed to the left foot switch cannot be
used.
Setting Descriptions
to UPPER
The effect is applied to the voices played
on the Upper keyboard.
to LOWER
The effect is applied to the voices played
on the Lower keyboard.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence